7
INSTALLATION
Installation information
The information given here is meant to give the user a better understanding of the installation.
Installation place
Install the swimming pool heat pump on a flat, horizontal, and stable surface. Maintain
1m
of open space in
front of the discharge grids and
3m
on the outlet side of the ventilator. And reserve enough space to allow
access to temperature controller.
Make sure that the discharged air will not be breathed in.
To perfect your installation
--Avoid directing the flow of ventilated air towards a noise-sensitive area, such as a room window.
--Avoid positioning heat pump on a surface that can transmit vibrations to the house.
--Try to avoid placing appliance under a tree or exposed to water or mud, which would probably make
maintenance more difficult.
Water connection
The heat pump is connected to a filtration circuit with a by-pass.
It is imperative that the by-pass is placed after the pump and the filter. The
by-pass generally consists of 3 valves.
This makes it possible to regulate the water flow which passes through the heat pump and to isolate the heat
pump completely for any maintenance work, without cutting the flow of filtered water.
During the first months of use, your heat pump is subject to condensation. This will result in
water discharge from the unit (can be a lot or a little depending on the moisture content), which
will gradually diminish.
