23
Rev 1
Standby Mode
When the unit is in standby mode, you can change the settings on the device.
Stopping the Red Light Session
If the time in the session runs out naturally then the unit will go into a 3 minute cool-down.
However if you need to stop the session prior to end of the sesion time you can do so by
hitting the START/STOP Button.
To pause the session you can hit the START/STOP button once.
Then to completely stop the tanning session prior to the end of our session time hit the
START/STOP button twice and the unit will go into Cool-down mode
.
Reading Hour Counter:
Hour counter lamps x 10
Reset hour counter lamps
Total Hours on Equipment Counter x10 (not able
to reset)
This symbol will appear on the LCD display after 500 hours on the lamps. It is
preferable after 1000 hours to replace the lamps with new ones. After replacing
the lamps reset the lamp hour counter.
Note:
The exposure label on the front of the unit shows the lamps that are
suitable for your unit.