Prostat PRS-812 Скачать руководство пользователя страница 27

Страница: 27 / 36

PRS-812 Resistance Meter

a. The instrument will:

(1) Apply and display the selected Test Voltage, or automatically default to and

display the appropriate voltage for the selected resistance decade

(2) Self adjust the measurement resistance range to the

selected decade

(3) Start the electrification period timer

b. If the measurement is within the

selected decade

, it and the electrification time will

be displayed continuously in the LCD.

c. Pressing RESET will stop the Measurement Test Cycle, and simultaneously:

(1) Turn Test Voltage power supply OFF

(2) Save the displayed measurement in the Memory Register

(3) Add one data point to the MEM XX counter and display total number of data

points in the Memory Register, e.g.,

MEM 05

(4) Prepare the instrument for the next measurement using the same settings.

(5) Pressing TEST will start a new Measurement Test Cycle

7. If the resistance you are measuring is

higher

than the decade that the PRS-812 is set

for

(Over Level)

will be displayed. To move the selected resistance range up to a

higher decade:

a. Press RESET once, this stops the Test Cycle but

does not add OL

to the Memory

b. Press MANUAL RESISTANCE RANGE SELECTION up arrow (



) to select the

desired decade; the appropriate LED will illuminate indicating the current selection

c. Press TEST to restart the Test Cycle

d. Repeat the RESET, Resistance Range adjustment and TEST sequence until a

stable measurement is displayed

8. If the resistance is

lower

than the selected decade, the PRS-812 will display

UL (Under

Level)

. To move the selected resistance range up to a lower decade:

a. Press RESET once, this stops the Test Cycle but

does not add UL

to the Memory

b. Press MANUAL RESISTANCE RANGE SELECTION down arrow (



) to select the

desired decade; the appropriate LED will illuminate indicating the current selection

c. Press TEST to restart the Test Cycle

d. Repeat the RESET, Resistance Range adjustment and TEST sequence until a

stable measurement is displayed

F. Resistance Measurements in the AUTOMATIC/MANUAL MODE of OPERATION

Содержание PRS-812




































Результаты поиска

Содержание PRS-812

Отзывы:

Prostat PRS-812, Руководство по эксплуатации, Страница: 27 / 36

Результаты поиска

Содержание PRS-812

Отзывы: