Prostat PRF-912B, Руководство пользователя

Страница: 7 / 20

7
Rev. A / November 2005
PRF-912B Miniature Concentric Ring Fixture Set
d. Only qualified instrument repair and test personnel should exceed the 100-volt opera -
tion limit, and then do so
only under controlled conditions using maximum precautions
against personnel shock.
e. Never, under any conditions, exceed 500 volts during fixture test or repair.
B. Other Operational Precautions
1. Do Not Use the PRF-912B Micro Probe if it fails to function during its continuity inspection test.
2. Do Not Use the PRF-912B Micro Probe if it becomes damaged in any way
3. Only Prostat Corporation authorized, qualified repair personnel may open PRF-912B or PRV-
913B housing, terminal assemblies, or perform product repair. Unauthorized opening of fixture
or instrument housings, device tampering, or attempted repair will absolutely void product
warranty and completely absolve Prostat Corporation, its employees, suppliers and representa -
tives of any responsibility, liability, or other, whatsoever.
WARNING
Unauthorized opening of fixture or instrument housings, device tampering, or attempted re -
pair will absolutely void product warranty and completely absolve Prostat Corporation of any
responsibility, liability, or other, whatsoever.
4. Do Not Touch Electrode Surfaces.
Electrodes will become contaminated with skin oils and
salts, and may become damaged or rendered inaccurate.
5. Do Not Use Or Store PRF-912B or PRV-913B In Damp Environments.
Always store devices with
protective caps in place in a dry environment, preferably at ≤ 20% Relative Humidity.
CAUTION
Storage or use of these instruments, fixtures and devices in damp or wet conditions may
cause damage to electrical circuits, and contact surfaces, which may effect performance or
increase the possibility of personnel shock or arc discharge.
6. Do not use these fixtures and devices in combustible or explosive environments.
WARNING
Improper handling and use of energized circuits may cause arc discharge, which in turn may
cause the ignition of combustible materials or fumes. Do not use exposed energized circuits in
flammable areas.
7. Do not attempt to measure energized materials, items or circuits with the PRF-912B
8. The PRF-912B is a precision fixture to be operated by experienced personnel familiar in the use
and handling of devices employing energized power supplies.