Prostat PRF-911, Руководство по эксплуатации

Страница: 8 / 24

PRF-911 Concentric Ring
7
a. Position adapter on BNC connector while positioning bayonet studs in
the adapter slots
b. Apply slight pressure and twist clockwise to lock the adapter in-place.
c. NOTE: To remove, apply slight pressure and twist counter clockwise.
3. Remove RED protective cap covering the electrode surfaces
4. Confirming the Fixture Ground and BNC Connection
a. Place PRF-911 Concentric Ring fixture on a flat surface with the
electrodes facing UP .
b. Plug one PRS-801 or PRS-812 Resistance Meter test lead to the BLACK
BNC/Dual Banana adapter receptacles.
c. Attach an alligator clip to the second PRS-801 or PRS-812 test lead. NOTE: TO
AVOID DAMAGE, DO NOT ATTACH ALLIGATOR CLIPS TO ANY
SURFACE OR PORTION OF THE PRF-911 FIXTURE.
d. Gently touch the tip of the clip to the metal collar of the BNC adapter
where the connection is made to the fixture housing. (see figure 5)
e. Select Ohms Mode by pressing “Mode” button once.
1. Push Test Button
2. Resistance Should be < 1
Ω
Figure 4: Installing the BNC Adapter
1
2