Prostat PGA-710B, Руководство пользователя

Страница: 10 / 44

10
Rev. E / October 4, 2018
PGA-710B Autoanalysis System
a. Press ON: LED’s #2 - #4 fl ash, then GREEN LED #2 blinks slowly to indicate unit is ON and
opera ng. (Figure 8)
b. Press Sleep: Press and hold pad un l LED’s #2 - #4 energize temporarily, then release pad to
place unit in standby or “sleep” mode. LED’s are OFF.
3. PAD 2 Start/Stop Recording Records data when in Remote Mode, i.e., when not connected to a
computer. Remote opera ons allow recording and storage of individual test fi les for computer
download at a later me.
4. PAD 3 Save File when in Remote Mode. Once a remote test cycle is completed, i.e., PAD 2 is
pressed to stop recording, pressing PAD 3 saves the test data as an individual fi le in the unit’s
memory.
5. PAD 4 Erase File(s) when in Remote Mode.
a. Press Once erases current test before it is saved in unit memory
b. Press and Hold un l LED’s 2–4 fl ash rapidly in sequence Erases ALL FILES in memory
6. Reset Re-boots PGA-710B in the case of latch up. See Figure 5.
B. LED Indicators
LED indicators provide informa on in computer connect and remote opera onal modes.
1. LED 1 RED : Low Ba ery level. Charge ba ery via USB connec on to computer or using AC/DC
converter. (See Ba ery Consump on in Techni-
cal Speci
fi ca ons on page 39)
a. Unit operates normally during either
charging mode. During opera on more
current is used than provided by USB con-
nec on. Periodically recharge ba ery with
the AC/DC charger.
b. Note that LED 1 does not operate, i.e.,
indicate low ba ery or energize, when Bat-
tery Bus Isola on Switch is
OFF .
2. LED 2 GREEN : Electronics energized and oper-
a ng.
a. ON when PGA-710B is energized, i.e.,
Ba ery Bus Isola on Switch is ON and System ON/Sleep pad is pressed. It blinks slowly to
indicate unit is energized and opera ng.
b. When in remote opera ons
1) Energized when unit turned ON , blinks to indicate unit energized and opera ng
2) Energized when PAD 2 Start/Stop Recording is pressed
Figure 8: ON/OFF: Power up or place PGA-
710B into “sleep mode”.