Installation Guide
P.23
Horn Timing Adjustment
Follow these steps to adjust horn pulse timing:
1.
Enter programming mode (page-16) - the parking lights will stay on for up to 20 seconds.
2.
Press and hold the brake pedal, then simultaneously press the and buttons
the horn will
chirp 5 times.
3.
Release the brake pedal.
4.
To change the timing:
a.
To increase the pulse by 3 ms, press the
button.
b.
To decrease the pulse by 3 ms, press the button.
c.
To increase the pulse by 10 ms, press the button.
d.
To decrease the pulse by 10 ms, press the
button.
5.
To save the new settings: press
and . The horn will honk 3 times to indicate that the settings
have been successfully saved.
Arming and Disarming the Starter Kill
This added security feature will prevent the vehicle from starting with the Ignition key when the starter kill is
armed. If the system was installed with the starter kill option, you will not be able to start the vehicle with the key
unless the system has been unlocked first or put into Valet Mode.
Note: If the Starter Kill is installed, the vehicle will benefit from a protection against starter motor damage
that could occur after remote-starting the engine should the user, by force of habit, turn the ignition key to
the CRANK position.
The Starter Kill (if installed) can be configured by the installer either to Passive Mode (so as to arm
automatically) or Active Mode (so as to require the user’s intervention for arming). By default, your Remote Car
Starter is configured to Passive Mode.
1)
Passive mode:
a)
To arm the Starter Kill, press the
button on the transmitter, OR
i)
In Passive Mode, the Starter Kill will automatically arm 1 minute (by default) or 3 minutes (if
configured this way) after the ignition is turned OFF or once the last door is closed (if the
doors are monitored).
ii)
The LED on the antenna will flash quickly during the countdown preceding the activation of
the Starter Kill.
iii)
Once the activation countdown expires, the LED will send a series of quick double flashes to
indicate that the Starter Kill is now armed.
b)
To disarm the Starter Kill, press the button on the transmitter.
i)
The Starter Kill will automatically rearm itself after 1 minute (by default) or 3 minutes (if
configured this way) if no door is left opened (if the doors are monitored) and the ignition is
not turned ON.
