Note:
Red indicator is on for 20 seconds to indicate that the remote
control is ready to be programmed. The following steps must
be entered while Red indicator is on.
4
Point the remote control toward the device that was turned
on in Step 1 and press in the first three-digit
Set-Up Code
number for that device using the number buttons (0-9) on the
remote control.
Your device will turn off when the correct
Set-Up Code
number has been selected. If the device does not turn off,
press in the next
Set-Up Code
number from the listing.
Continue to select
Set-Up Code
numbers until your device
turns off, before you proceed to Step 5.
Note:
If you have tried all of the three digit
Set-Up Code
numbers listed for your device and it still did not turn off,
please proceed to the
Auto Search Method
on page (10) to
program your remote control.
5
Once your device turns off, press the
Device Button
selected
in Step 3 once again to store the
Set-Up Code
number. The
lights will flash twice.
6
Test the remote control for your device. Try the
POWER,
CHANNEL UP AND DOWN, VOLUME UP AND DOWN
buttons, etc. If any of the buttons do not perform as they
should, please repeat the set-up from Step 1 using the next
Set-Up Code
number for your device.
Note:
Some audio/video devices have separate buttons for
POWER
ON
and
POWER OFF
. To operate these devices on the
remote, press the corresponding
DEVICE Button
to turn the
equipment
ON
and press the
POWER
button to turn the
equipment
OFF
.
7
Please repeat the above steps to program the remote control
for each of your other devices.
Using Your Remote
9
Содержание RV479 DTS-ES
