RLX-FHE, RLX-FHES, RLX-FHS
♦
RadioLinx FH
Getting Started
Frequency-Hopping Industrial Radio
Page 14 of 151
ProSoft Technology, Inc.
November 25, 2008
Edit
existing networks (page 75) or radios (page 71, page 77):
o
add or delete Remote or Repeater radios
o
re-assign roles to the radios.
o
define operation parameters
Diagnose
functionality of existing networks (page 79).
o
display the status of each REMOTE or REPEATER radio (when a
MASTER radio is cabled to the PC)
Note:
ProSoft Technology, recommends that the RadioLinx ControlScape FH Setup Application be
installed on
only one computer
and that the network configuration be done
only from that one
computer
. When a
network is designed
, configuration settings are stored in a database in the
RadioLinx ControlScape FH Setup Application.
When networks are modified
, the RadioLinx
ControlScape FH Setup Application depends upon the retrieval of the network's configuration
history. Network modification and maintenance is easier if the RadioLinx ControlScape FH
Application Software is installed on only one computer. All subsequent network-related
configurations are done using that one computer.
The computer where the RadioLinx ControlScape FH Setup Application has been
installed will be referred to as the Configuration PC throughout this
documentation.
2.3
Install Configuration Software
1
Insert the ProSoft Solutions CD in your CD-ROM drive. On most computers,
a menu screen will open automatically. If you do not see a menu within a few
seconds, follow these steps:
a
Click the Start button, and then choose Run.
b
In the Run dialog box, click the Browse button.
c
In the Browse dialog box, click "My Computer". In the list of drives,
choose the CD-ROM drive where you inserted the ProSoft Solutions CD.
d
Select the file
prosoft.exe
, and then click Open.
e
On the Run dialog box, click OK.
2
On the CD-ROM menu, select Setup Software under RLX-FH Frequency
Hopping. This action opens the Setup Wizard for .
3
Follow the instructions on the installation wizard to install the program with its
default location and settings.
4
When the installation finishes, you may be prompted to restart your computer
if certain files were in use during installation. The updated files will be
installed during the restart process.
