Reference
RLX-FHE, RLX-FHES, RLX-FHS
♦
RadioLinx FH
Frequency-Hopping Industrial Radio
ProSoft Technology, Inc.
Page 123 of 151
November 25, 2008
Cancel:
Click the Cancel button to close the dialog box and discard your
changes.
15.1.20
Radio Color Dialog Box
The Radio Color dialog box opens when you select a radio, and then open the
Radio menu and choose Radio Colors. Use this dialog box to assign a unique
color to the selected radio. The radio color is for your reference only, and does
not affect the operation of the network.
Radio Colors:
Choose a color for the radio from the selections on this dialog
box.
OK:
Click the OK button to save your selection and close the dialog box.
Cancel:
Click the Cancel button to close the dialog box and discard your
changes.
15.1.21 Radio
Configuration Status Dialog Box
The Radio Configuration Status dialog box opens when you attempt to
communicate with a radio network in Diagnostic mode, and is not able to
connect with any radios on the network.
Click Retry to attempt an automatic baud rate detection sequence.
Click Cancel to quit attempting to connect to a radio.
15.1.22
Radio Status Dialog Box - Local Radio
The Radio Status dialog box opens when you select a local radio (a radio
physically connected to the configuration PC) in Diagnostic mode. Use this dialog
box to view the current status of the selected radio.
Radio Name:
The name of the radio, configured on the Radio Configuration
dialog box.
Address:
This radio's address on the network. The master radio is always 1.
Serial Number:
This is the radio's serial number.
Firmware Version:
The radio's firmware version. All radios on the network
must use the same firmware version.
Hardware:
The radio's hardware version.
FPGA
: the version number of the Field Programmable Gate Array logic in the
radio. This logic determines the hardware characteristics of the radio.
Baudrate:
The configured baud rate for this radio.
Channel Number:
The configured channel number for this radio. All radios
on the network must use the same channel number.
Network Type:
This is the network type configured on the Network
Properties dialog box.
OK:
Click the OK button to save your selection and close the dialog box.
15.1.23
Radio Status Dialog Box - Remote Radio
The Radio Status dialog box opens when you select a remote radio (a radio
connected wirelessly to the RadioLinx network) in Diagnostic mode. Use this
dialog box to view the current status of the selected radio.
