ProSoft inRax MVI94-GSC-E, Руководство пользователя

Страница: 11 / 60

Hardware Installation MVI94-GSC-E ♦ FLEX Platform
User Manual Generic ASCII Comunication Module
ProSoft Technology, Inc.
Page 11 of 60
July 6, 2009
1.5 Installing the Serial Adapter Cables
Two identical serial adapter cables are supplied. Each cable has a locking-type 8
pin Mini-DIN plug on one end and a DB-9 male connector on the other end. The
Mini-DIN connector on each cable is inserted into the Mini-DIN receptacles
marked
PRT1 and PRT2 on the Base.
To install the locking-type Mini-DIN connector, slide the spring-loaded sleeve
back while inserting the plug into the receptacle on the Base, and then release
the sleeve when fully seated. The locking mechanism prevents the cable from
being removed during normal operation. To remove the cable, slide the sleeve
back and remove the plug.
1.6 Wiring the Power Connections
External power is supplied to the Base on the 2 pin screw terminal block. The
power supply can be either 24Vdc or 12Vdc, and should be located in close
proximity of the base.
ƒ
Connect dc common to the COM terminal
ƒ
C24V dc or +12V dc to the 24VDC terminal