ProSoft Technology Wireless I/O System, Быстрый старт

Страница: 5 / 14

Wireless I/O System ♦ Overview
Quick Start Guide
ProSoft Technology, Inc. Page 5 of 14
May 6, 2016
1 Overview
This guide provides basic information to assist you in quickly getting started.
Go to http://www.prosoft-technology.com/ to download the full User Guide for
detailed installation and other helpful information. Advanced User Interface
software is also available at the site for download.
Warning 1: Ensure installation of the system meets applicable state and national electrical code
requirements. The installation of the system should only be performed by a qualified installer or a
factory representative.
Warning 2: To prevent ignition of flammable or combustible atmospheres, disconnect power
before servicing.
Caution: The system must be installed within an enclosure that requires a tool to access. This is to
prevent inadvertent disconnection of any of the power wiring, signal wiring or communication
cables.
Caution: EXPLOSION HAZARD. Do not disconnect equipment unless power has been switched
off or the area is known to be non-hazardous.
Caution: EXPLOSION HAZARD. Do not remove or replace fuse when energized.
Note: This equipment is designed for use in Class I, Division 2 (Zone 2) or non-hazardous
locations only.