ProSoft Technology RadioLinx RLXIB-ICN, Руководство пользователя, Страница: 23 / 129

RLXIB-ICN ♦ 802.11n Start Here
Industrial Client User Manual
ProSoft Technology, Inc. Page 23 of 129
July 25, 2013
2 Right-click on the radio to open a shortcut menu, and then choose A
SSIGN
IP .
This action opens the Assign IP Address dialog box.
3 Select one of the unused IP addresses, and then click OK .
Tip : You must also assign a Gateway address. The Gateway assigned to your PC’s Ethernet port
is offered as a suggestion. If your PC does not have a Gateway setting, the Gateway field in the
Assign IP Address dialog will be blank. You will need to enter a Gateway before clicking OK.
For information, see Radio Access settings (page 54).
1.7.6 Set up the Client Radio
A client radio allows a user to connect an Ethernet device to a wireless network
through any 802.11n access point. Any Ethernet device that has an RJ45
Ethernet port can, in effect, be transformed into an 802.11n wireless client by
attaching the radio. Only a single device can be connected to a Client radio. Do
not connect to more than one Ethernet device (using a switch or hub). Use a
Client radio if you need to connect to another brand 802.11n access point.
To connect a device to a Client radio, try using the Auto setting. To test whether
the Auto setting will work:
1 Connect the cable between the device and the radio.
2 Turn ON the radio power, or cycle the power if the radio is already on.
3 Turn ON the device. Watch the radio to see if it initializes. The Auto setting
will work if the device advertises its MAC ID to the radio.