ProSoft Technology RadioLinx RLXIB-ICN, Руководство пользователя, Страница: 18 / 129

Start Here RLXIB-ICN ♦ 802.11n
User Manual Industrial Client
Page 18 of 129 ProSoft Technology, Inc.
July 25, 2013
5 Set up the master radio first, using the R
ADIO
S
ETTINGS
window in the
RadioLinx Configuration Manager.
6 Click A
PPLY
to save the master radio settings.
To cancel the settings and start over, click the C
LEAR
button.
7 Unplug the Ethernet cable from the radio and plug it into the next radio to be
configured.
8 Set up a Repeater. Return to the WirelessN Discovery Tool. To be sure that
you are seeing the latest status of the radio(s), go to the toolbar (page 100)
and click the
C
LEAR
icon (eraser) followed by the S
CAN
icon (magnifying
glass). Double-click the listing of the next radio to configure, and configure it
as a repeater radio.
9 Save the Radio Configuration. Save the repeater radio settings by clicking
A
PPLY
at the bottom of the Radio Settings screen. Repeat steps 7 through 9
to configure each repeater in the network.
10 After configuring the network and its radios, physically label each radio.
Labeling eliminates confusion about which radios correspond with which
radio configurations in the software. You should identify the radio's name,
network SSID, and IP address, if set.
11 Install the radios and antennas.
The rest of this section describes each of these steps in more detail.
1.7.1 Start WirelessN Discovery Tool
1 Click the S
TART
button, and then navigate to P
ROGRAMS
/ P
RO
S
OFT
T
ECHNOLOGY