ProSoft Technology MVI56E-MNETC Скачать руководство пользователя страница 14

Страница: 14 / 72

Before You Begin

MVI56E-MNETC ♦ ControlLogix Platform

Setup Guide

Modbus TCP/IP Multi Client Enhanced Communication Module

Page 14 of 72

ProSoft Technology, Inc.

April 18, 2011

2.1

System Requirements

The MVI56E-MNETC module requires the following minimum hardware and
software components:

Rockwell Automation ControlLogix

processor (firmware version 10 or

higher), with compatible power supply, and one free slot in the rack for the
MVI56E-MNETC module. The module requires 800 mA of available 5 Vdc
power

Rockwell Automation RSLogix 5000 programming software

Version 16 or higher required for Add-On Instruction

Version 15 or lower must use Sample Ladder, available from
www.prosoft-technology.com

Rockwell Automation RSLinx

communication software version 2.51 or higher

ProSoft Configuration Builder (PCB) (included)

ProSoft Discovery Service (PDS) (included in PCB)

Pentium

II 450 MHz minimum. Pentium III 733 MHz (or better)

recommended

Supported operating systems:

Microsoft Windows

Vista

Microsoft Windows XP Professional with Service Pack 1 or 2

Microsoft Windows 2000 Professional with Service Pack 1, 2, or 3

Microsoft Windows Server 2003

128 Mbytes of RAM minimum, 256 Mbytes of RAM recommended

100 Mbytes of free hard disk space (or more based on application

requirements)

256-color VGA graphics adapter, 800 x 600 minimum resolution (True Color

1024

768 recommended)

CD-ROM drive

Note:

The Hardware and Operating System requirements in this list are the minimum

recommended to install and run software provided by ProSoft Technology

. Other third party

applications may have different minimum requirements. Refer to the documentation for any third
party applications for system requirements.

Note:

You can install the module in a local or remote rack. For remote rack installation, the module

requires EtherNet/IP or ControlNet communication with the processor.

Содержание MVI56E-MNETC









































































Результаты поиска

Содержание MVI56E-MNETC

Отзывы:

Бренды по названию

Популярные бренды

ProSoft Technology MVI56E-MNETC, Руководство по установке

Результаты поиска

Содержание MVI56E-MNETC

Отзывы:

Бренды по названию

Популярные бренды