ProSoft Technology MVI56E-AFC, Руководство по настройке и конфигурации, Страница: 20 / 151

MVI56E-AFC / MVI69E-AFC ♦ Enhanced Liquid and Gas Flow Computer Creating an EAFC Manager Project
ControlLogix® and CompactLogix™ Setup and Configuration Guide
ProSoft Technology, Inc. Page 20 of 151
2 Set the preferences as necessary.
Parameter
Description
Show US differential
pressure units as … This setting determines the units for differential pressure units when using US
units. Options are as follows:

inH2O: inches of water column at 4° Celsius (39.2° Fahrenheit)

hW: Inches-of-water (water at 60° Fahrenheit)
Shown analysis molar
concentrations in … This setting determines how molar concentrations are represented in the
Stream Component Analysis dialog. Options are as follows:

Percent

Fraction
Show density of gas
relative to that of air as
… This setting determines which term is used to indicate the density of gas
relative to that of air in EAFC Manager. Options are as follows:

Specific gravity

Relative density
Auto-report transmitter
calibration on close
session? To report a transmitter calibration automatically after closing the calibration
session, select
Y
ES
for this setting.
Auto-append MVT
calibration reports to
same file? To append MVT calibration reports to the same file automatically, select Y
ES
for this setting.
Auto-mediate
transmitter calibration
point when available? To mediate the transmitter calibration point automatically when it is available,
select
Y
ES
for this setting