ProSoft Technology InRax PC56, Быстрый старт

Страница: 8 / 25

PC56 ♦ ControlLogix Platform Installing the PC56 Embedded PC
In-Rack Industrial PC Quick Start Guide
Page 8 of 25
ProSoft Technology, Inc.
November 18, 2009
DB-9 Female to 5 Pos Screw Terminal
Adapter PC56 CD
1.1.1 IDE Modules
If you purchased the PC56-XP-IDE, you will receive a second carton that
contains the IDE module.
1.1.2 Installing Modules
All modules fit into standard slots on the ControlLogix backplane. The PC56
Embedded PC and each IDE or expansion module will each take a slot on the
ControlLogix backplane. For example, if your purchased the PC56-XP-IDE, you
will need two available slots on the backplane. The slots must be side-by-side.
Additional modules take additional slots and all are required to be side-by-side.
To install the PC56 Embedded PC or any of the other modules….
1 Check jumper configurations on each module
2 If required, connect IDE or expansion modules to the PC56 Embedded PC
3 Insert modules in the ControlLogix rack
4 Connect your Peripherals
5 Verify Boot Up