ProsKit mt-2017, Руководство пользователя

Страница: 14 / 32

13
2). Open the big lower tilt device on the rear case and then turn
the lock by 90
°
degree and take off the cover of the battery
cabinet together with the big tilt device.
3). The old fuses inside their holders located on the PCB can be
visible and access to be removed. Then take off the melt
fuses and install the new fuses into their original places.
The 0.5A/250V fuse is at the left side and 10A/250V fuse at
the right side.
4). Replace the battery cover and turn the lock by 90
°
degree
again to tighten the lower battery cover.
NOTE: 2pcs stand-by fuses are provided and located beside the
batteries under the lower battery cover with rating marked below
the fuses.
Lock for lower 1.5V
Battery Cover
Lower 1.5V Battery Cabinet
inside and Fuses Layout
Screw
Hole
9V Battery