Prosharp SkatePal-Pro, Оригинальное руководство пользователя

Страница: 6 / 12

Adjusting the grinding wheel sideways
Adjust the grinding wheel in small steps, 1/8 round at the time. An easy way of changing
position of the grinding wheel is to first drive the wheel to the left, so you get more room to
adjust the screw. To do this, push start button for five seconds and keep the button down.
Wheel will start go to the left without grinding. Once you let go off of the start button, the
wheel will stop. (If you want the wheel even further left, push the button again for five
seconds and repeat previous steps).
Push once more and the wheel will come back to the home position
Adjusting of the centering of the grinding wheel can be done by screwing the thumb screw.
Clockwise moves the wheel towards you and anti-clockwise moves the wheel from you.
The thumb-screw can be found beside the grinding wheel, see picture below.
Technical Data

Power supply unit 150W AC INPUT 100-240 VAC 50/60hz 3.6
A

Weight 32.6 lbs (14.8 kg) Width
8.6” (220 mm)

Length
27.5” (700 mm)
Height
12.6” (320 mm)

Noise level 80dB
START/STOP
CYCLE
GRINDING
WHEEL DOOR
QUICK-RELEASE
HANDLE/CLAMP
POWER
CORD INPUT
ON/OFF
VACUUM
CLEANER INPUT