Prosharp AS 1001-Portable, Оригинальное руководство пользователя

Страница: 6 / 11

Page 6
Connection

Adjust the right or left foot to make the machine stable.

Connect tab single-phase A.C, 100-240 VAC 50-60 Hz.

Release the emergency button.

Lamps are walking 1 by 1, put in a skate and then machine is ready to sharp.

Connect the dust-cleaners hose to the machine for automatic start of dust-cleaner when
grinding. Connect dust-cleaners hose with the machines hose.
Placement

The machine must be placed on a flat, steady workbench with a height between 80-100
cm.

The working area must be well lit. Keep work area clear. Cluttered areas and benches
invite injuries.
Issuing

The noise level of the machine is less than 70 dB.

During use of the machine, dust will occur and this dust must be taken away.

Clean the machine between every grinding.
Engagement

For information regarding the grinding machine the responsible operator must inform other
users about safety and maintenance instruction.

For safety reasons, modifications of the machine or its design are not allowed.
Maintenance

The ProSharp AS 1001-Portable is manufactured for low maintenance demands.

In your own interest and for your own safety, control and cleaning must be done before,
during and after grinding.

Remove the plug before carrying out any adjustment, servicing or maintenance.
Important!

All operators must read and understand original instructions regarding operation and
maintenance contained in this manual, before using the machine.

People under 18 years of age may NOT use the machine!

Never move the skate-holder by hand. Only use the arrows to move the skate-holder.

Only non-flammable vacuum cleaners should be connected to the AS 1001.