Page 2
Installation instructions
1.
Unpacking and installation:
Open the transportation box by unscrewing the locks on both sides of the transportation box.
2. Place the machine on a steady table on a height between 80-100 cm.
3. Cut all cable ties.
4. Plug the power cord of the machine and vacuum cleaner. Place the NDT3 diamond tool to the
diamond holder.
5. Use the machine in a warm, dry and well lit room.
6. The AS 1001-Portable includes: 1 x transportation box, 1 x AS 1001-Portable skate sharpener,
1 x Grinding wheel MA70 (mounted), 1 x diamond tool NDT3 (mounted), 1 x instruction
manual, 1 x power cord, 1 x 19mm wrench, 2 x key for emergency stop.
7. After usage of the machine clean the machine and the working space properly. Push down the
emergency stop button. Before transportation make sure that the grinding wheel arm is steadily
locked so it can’t move during transportation. Unplug the power cords. Place the machine into
the transportation box and lock it.
Operation instructions:
1. When starting the machine turn the key on the emergency stop switch. All lights on the
“SHARP” button will start to blink. Test the grinding wheel by pushing once the “DRESS”
button. Grinding wheel should now run steadily. Push the button again and the wheel will
stop. Dress the grinding wheel for desired radius of hollow (see dressing of the grinding
wheel on page 9.)
Safety precautions:
WARNING!
When using electric tools basic safety precautions should always be followed to
reduce the risk of fire, electric shock and personal injury. Read all these instructions before
attempting to operate this product and save these instructions. The use of any accessory or
attachment other than one recommended in this instruction manual may present a risk of personal
injury.
1. Always use eye, ear and breathing protection. Always connect a vacuum cleaner to the
machine to minimize dust occurring outside the machine.
2. Wear proper apparel. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other
jewelry which may get caught in moving parts. Nonslip footwear is recommended. Wear
protective hair covering to contain long hair.
3. Do not expose the machine into rain. Do not use the machine in damp or wet locations.
Keep work area well lit. Keep work area clear. Cluttered areas and benches invite injuries.
Do not use the machine in the presence of flammable liquids or gases.
4. Guard against electric shock. Avoid body contact with earthed or grounded surfaces (e.g.
pipes, radiators, ranges, refrigerators)
Содержание AS 1001-Portable
Страница 4: ...Page 4 Control Panel Manual ...
