Prosense FMM100-1001, Руководство по эксплуатации

Страница: 12 / 35

12
MEW MAW AEP ASP
-120 Q [% MEW]
[°C] T -40 -20 80 100 110
-130
-50
[°F] -40 -4 176 212 230 -58
120 100 0 130
4
3,5 0 FOU=OFF
20
21,5
22
[mA]
0
10
11,5
12 FOU=On
[V]
1
2
5
4
6
5*
6*
3
cr.UL UL OL cr.OL
Figure 1: Characteristics of the analog output according to the standard IEC 60947-5-7.
Q:
Flow (a negative flow value means flow against the marked flow direction)
T: Temperature
UL: Below the display range
OL: Above the display range
cr.UL: Below the detection zone (error)
cr.OL: Above the detection zone (error)
FOU=On: Default setting at which the analog signal goes to the upper final value in case
of an error.*
FOU=OFF: Default setting at which the analog signal goes to the lower final value in case
of an error.*
* The type of error is displayed: cr.UL, cr.OL, Err (
→ 12).
1
Analog signal (voltage or current)
2
Measured value (flow or temperature)
3
Detection zone
4
Display range
5
Measuring range
5*
Analog signal in the measuring range with
factory setting
6
Scaled measuring range
6*
Analog signal for scaled measuring range