Pro's Kit SS-611A, Руководство пользователя

Страница: 7 / 16

Power tools are dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool’s
operation. If damaged, have the power tool repaired before use. Many accidents
are caused by poorly maintained power tools.
Use the power tool, accessories and tool bits etc., in accordance with these
instruction and in the manner intended for the particular type of power tool, taking
into account the working condition and the work to be performed .Use of the power
tool for operations different from intended could result in a hazardous situation.
WARNING! The use of accessories or attachment, other than those
recommended in this instruction manual, may present a risk of personal injury.
Additional safety instruction for heat guns
Fully unwind cable drum extensions to avoid potential overheating.
Avoid instant switch between power and temperature to secure the using life of heater
and switch control. Heater is consumable accessory.
When an extension cable is required, you must ensure that it has the right ampere
rating for you power tool and is in safe electrical condition.
Always switch off before you put the heat gun down.
Do not let anyone under 18 years operate this tool.
Rags, cloths, cord, string and the like should never be left around the work area.
If you are interrupted when operating the tool, complete the process and switch off
before looking up.
Do not block the air inlet or outlets.
Do not use in proximity to flammable materials.
Maintenance
There are no serviceable parts, no maintenance is required.
Power cord maintenance
If the supply cord needs to replace, the task must be carried out by the manufacturer, the
manufacturer’s agent, or an authorized service centre in order to a safety hazard.
Cleaning
Keep the tool’s air vents unclogged and clean at all times.
Remove dust and dirt regularly .Cleaning is best done with a rag. Wear safety
goggles or an eye shield and gloves whist cleaning.
Never use caustic agents to clean plastic parts.
CAUTION. A mild detergent on a damp cloth is recommended. Water must never
come into contact with the tool.
General inspection
Regularly check that there is no damage to the heat gun.
5.
6.
1.
2.
3.
4.
5.
6.
7.
8.
9.
1.
2.
3.
6