Pro's Kit GE-634, Руководство по сборке и инструкция, Страница: 36 / 44

33
Check if there is excess air inside the Cylinder G1. In this case, please go to page34 and follow the steps accordingly.
Check if the cylinders are installed correctly ( refer to pages 12 ~13 ).
Check if palm and finger assemblies are all installed correctly ( refer to pages 6
~
9 ).
跟著以下方法，卸下液壓筒並重新注水
Follow the next quick guide to disassemble cylinders & refill with water.
簡易故障排除
Trouble Shooting
Check if there is excess air inside the Cylinder G2, If yes case, please go to page 35 and follow the steps accordingly.
Check if all tubes are correctly aligned and not twisted during assembly ( refer to page 19, step 8 ).
Check if the cylinders are installed correctly (refer to pages12 ~13).
Check if palm and finger assemblies are all installed correctly ( refer to pages 17~18 ).
C
如果姆指操作不順暢，請跟著以下步驟進行確認
If thumb does not work properly, check the following steps.
A
回到第20頁並確認是否依照步驟
1~6
正確安裝
Go back to page 20, steps 1~6, and check if all steps are installed correctly.
B
如果手指頭無法順暢抬起或放下，請跟著以下步驟進行確認
In case fingers don’t lift up and down smoothly.
Air
空氣
水
Water
如果手指頭操作不順暢，請跟著以下步驟進行確認
If the fingers do not work properly, check the following steps.
液壓筒
Cylinder
G1
液壓筒
Cylinder
G2
D
如有漏水或軟管脫落狀況，請依照以下方式解決
In the case of water leakage or slipped tubes.
1.
請確認
G1
液壓筒裡是否有多餘的空氣。如有，請依照
34
頁的步驟確認安裝
2.
請確認所有液壓筒是否安裝正確(請參考
12~13
頁步驟)
3.
請確認手掌和手指是否安裝正確(請參考
6~9
頁步驟)
1.
請確認
G2
液壓筒裡是否有多餘的空氣。如有，請依照
35
頁的步驟確認安裝
2.
請確認所有軟管是否安裝正確，並且沒有扭轉或交錯的狀況(請參考第
19
頁，步驟
8
)
3.
請確認所有液壓筒是否安裝正確(請參考
12~13
頁步驟)
4.
請確認手掌和手指是否安裝正確(請參考
17~18
頁步驟)