Page 7 of 14
09-13-568-Rev5
7
Loosely
fi
t Adjuster strap through the cam buckle in the Fixed Strap assembly prior to
fi
tting recovery
tracks. Insert recovery tracks through the loose Straps. Locate the cross-hairs on your recovery tracks
into the corresponding cross slots on the Baseplates. Tighten Straps
fi
rmly and secure the Velcro
sections.
Installation directly onto Prorack HD, Tradesman And Other Heavy Duty Crossbars
Check crossbar spread is between 492 mm to 892 mm. Position Baseplates onto separate crossbars
noting the narrow ends face towards the front and rear of the vehicle.
Set the distance between the inside of the Baseplates according to your Recovery Track type:
TRED 800 = 235 mm
TRED 1100 / MAXTRAX MKII = 440 mm
1
Note the approximate positions
on the Baseplate channels that
align with the channels in the
crossbars.
440 mm
235 mm
Baseplate Channels
Baseplate Channels
Insert 3 x M8 Spring Nuts in each crossbar channel in the positions under the Baseplate channels noted
in the previous step. Push Spring Nuts down and twist to lock into place as pictured.
2
Note - Your crossbar spacing and
track size will determine where in
the Baseplate channels to secure
to the crossbars to obtain the
recommended distance.
