Page 2 of 3
MAINTENANCE
•
Check accessory is securely attached whenever you refit it to the vehicle. If the unit feels
loose, refer to the fitting instructions and readjust.
•
Regularly check all fasteners. This includes all attached accessories and roof racks.
CAUTION
•
Ensure that all loads are distributed evenly across the roof racks and are fastened securely.
•
A loaded roof rack system can alter the performance of your vehicle. Be especially aware
of the effects of side winds, changing of direction, and braking performance. Avoid rapid
acceleration and deceleration. Drive Carefully.
•
Make sure all loads are securely fastened with non-elastic straps. Check regularly during
longer journeys.
•
Never drive into a car wash with the roof rack system fitted.
•
Do not exceed the vehicle manufacturer’s roof load rating. Total load equals weight of roof
racks + acces cargo/equipment.
INSTALLATION WITH PRORACK HD, TRADESMAN AND OTHER
HEAVY DUTY CROSSBARS
2
Place M6 spring nut into each crossbar channel. Position where you want the
accessory to be. Push down and twist spring nut to lock into place.
Using two longer M6 x 20mm capscrews, two M6 spring washers and two M6
washers, assemble awning bracket or other accessory mount as shown.
