Fitting Kit
EN
K671
●
Select plastic internal block (from fitting kit)
and insert into foot.
●
Repeat for all legs.
Fitment
●
There are 4 concealed mounting points
hidden by the vehicles rubber insert on the
roof.
●
Measure from the front of the rubber insert
and make a mark at 355mm and 1245mm.
●
From these 2 marks measure 25mm
forward and 25mm back and mark a line
across the rubber insert.
●
Carefully lift the rubber insert by hand to
reveal the mounting points as shown, only
lift the minimum amount required to reveal
the mounting point.
●
Note: Do not use sharp objects or tools to
lift the rubber moulding.
●
Note: Take care when lifting the rubber
insert not to kink or bend it.
●
Note: The mounting points are covered
with sealant.
7
Содержание K671
Страница 2: ...Fitting Kit K671 x 4 x 4 x 4 x 4 x 4 2 ...
