
UPPER CONTAINER
LID
KNOB HANDLE
Plug(s) for unused filter hole(s)
Filter washer(s) mount on top side of
container
Wing nut
Installation
Selecting a location for your system
Your system should be placed in a cool place on a flat surface.
Setting up the system
1) Hold knob on top side of lid and insert screw with washer from
underneath side of lid and tighten with screwdriver.
2) Install spigot
(see Installation Diagram A on page 6 for details)
.
Remove nut from spigot. Insert stainless washer and one white washer
on threaded stem of spigot. Insert spigot through hole in the side of
the lower container. Place white washer and stainless washer on
threaded stem and secure in place with nut. Tighten nut securely
with pliers until snug.
3) Place the black non- slip pad underneath the lower container.
Installing the filters
1) Place washer onto filter stem.
2) Place the filter stem through a hole in the upper container.
3) Install wing nut on the underside of the upper container.
DO NOT OVER TIGHTEN
4) Repeat as necessary.
5) Plug remaining hole(s) with enclosed plug(s).
6) Place upper container onto lower container.
6