background image

47

green LED

 is mounted on the top of your docking station and indicates the right connec-

tion of the Booster into the docking station. 

2.6. DC docking station - Vehicle                                                                             

Developed to be connected to the recovery vehicle’s battery terminals, the simple fact of 

putting the Booster back into its docking station allows it to be charged at 100% for the 

next intervention. 

Connection on the vehicle:

n

 Connect the 

black cable to the negative terminal

 of the battery (or the earth).

n

 Connect the 

red cable to the positive terminal

 of the battery.

-> For this, use the cables lugs provided for that purpose, if necessary.
A fuse of 15 or 20A can be mounted on the station circuit.

green LED

 is assembled at the top of your docking station and indicates the recharge of 

the Booster.

If you have connected your docking station to an auxiliary power supply in your vehicle, it 

will be necessary to switch on the ignition or to run the engine to supply the station (green 

LED).

A one-way diode  installed on the docking station  avoids  the discharging of the Booster 

towards the vehicle.

For a well charged Booster, the tension of the place where you connect the docking sta-

tion must be around 14,4V, engine running at about 2000 rpm.

EN

Содержание 520003DC















Отзывы: