DANGER:
To reduce the risk of electric shock: Always unplug this furnishing
from the electrical outlet before cleaning or servicing.
WAR N I N G
:
To reduce the risk of death, serious injury, or property damage, read
and follow this safety information and the provided instructions when
assembling this product. Do not change or replace components and
accessories provided by Propr Office.
INSTALL ONLY APPROVED WORK SURFACES
Work surface must be at least ¾" thick and weigh no more than 5 lb.
per square foot (For example, a 2'x6' desktop should weigh no more
than 60 lb). Do not exceed a maximum weight for the desktop of 75
lb. To prevent table from tipping or collapsing, make sure the desk
frame is not overloaded by the weight of tabletop and objects you
plan to put on the table. If you are unsure, contact customer service.
KEEP AWAY FROM CHILDREN
This table system is not designed for use in homes or other areas
accessible by small children. For indoor commercial office use only.
BE CAREFUL WHEN ADJUSTING DESK HEIGHT
Body parts and property can be caught between the moving work
surface and an immobile obstacle (such as shelves, furniture, win-
dow sills, or walls). Keep at least one inch of clearance around desk
and make sure nothing is in table’s path for its entire range of motion.
Before raising or lowering:
• Check surroundings on all sides of desk are clear
• Make sure corded objects will not be pulled off table or cause
other objects to fall
• Make sure desk power cord moves freely as desk moves up
and down
DO NOT OVERLOAD DESK
To prevent table from tipping or collapsing, make sure the desk frame
is not overloaded by the weight of tabletop and objects on table.
Evenly distribute load; excess loads near edges can reduce stability
and lead to tip over.
• Do not exceed maximum load (including weight of desktop) of
200 lb. (91Kg) for two-leg configuration.
• Do not exceed edge load of 25 lb. when positioning monitors
or mounting accessories.
• Do not sit or stand on table.
USE CARE WHEN MOVING DESK
• Clear objects and equipment from table before moving to
reduce the risk of tipping over.
• Adjust the desk to its lowest height before moving.
• To disconnect, remove plug from outlet.
• Do not move a loaded desk.
DO NOT OPEN ELECTRICAL COMPONENTS
Do not attempt to service table components. There are no user-ser-
viceable parts inside the motor control units or table legs. If your
table needs service, contact customer service. Never operate this
table if it has a damaged cord or plug.
KEEP TABLE FRAME DRY
Keep all electrical components away from water and high humidity.
Clean only with a dry or slightly damp cloth. Do not spray cleaning
solutions directly onto table system.
GROUNDING INSTRUCTIONS
This product is equipped with a cord having an equipment-ground-
ing conductor and a grounding plug. Use only the cord provided.
Make sure that the product is connected to an outlet having the
same configuration as the plug (as shown in Illustration A) that is
properly installed and grounded in accordance with all local codes
and ordinances.
Do not modify the plug provided with the product – if it will not fit the
outlet, have a proper outlet installed by a qualified electrician.
• No adapters are to be used with this product.
• Keep cord away from heated surfaces.
Grounded
Outlet
Grounded Outlet Box
Grounding
Pin
ILLUSTRATION A
1"
1"
1"
1"
1"
1"
S A F E T Y I N F O R M AT I O N
proproffice.com 9
P E R C H A D J U S TA B L E H E I G H T B E N C H S Y S T E M
