11.
Connect the supplied power cord (AC) to the control box.
12.
Attach all cables to the table top. Attach cables in order to avoid any damage during operation. Be sure to leave enough slack in the cables
to allow for the table to move into its highest position. Never wrap cables and/or cords around the columns.
13.
Connect side by side tables.*
*For units specified to use a side-to-side connector, attach lower tray to the bottom of the ganging bracket of each bench using the M4-
0.7x6mm length screws. The maximum tightening torque for these screws is 4Nm (35in-lbs). Once installed, the upper tray can be slid on
to fit.
A S S E M B L Y I N S T R U C T I O N S
proproffice.com 7
P E R C H A D J U S TA B L E H E I G H T B E N C H S Y S T E M
