![PROPOINT PROPOINT Скачать руководство пользователя страница 11](http://html.mh-extra.com/html/propoint/propoint/propoint_instructions-manual_1617857011.webp)
V1.0
Pneumatic Grease Gun
8886335
Visit www.princessauto.com for more information
11
REMOVING EMPTY GREASE CARTRIDGES
1. Pull back the plunger handle (L) to its maximum extended position
and lock (K) it in place.
2. Unthread the grease gun head from barrel (D) assembly by turning
it counter clockwise.
3. Remove the empty cartridge from the barrel.
CONVERTING TO ALLOW FILLING FROM
BULK CONTAINER OR FILLER PUMP
IMPORTANT! Always remove any cartridges from the grease gun
prior to bulk filling.
1. Unthread the barrel cap from barrel assembly and pull out the
follower and spring from barrel.
2. Hold the follower between the
thumb and forefinger to flip
the follower lip from the rear
side (Fig. 3-1) to the front side
(Fig. 3-2). It should match the
bulk configuration in Fig. 2.
3. Put the follower back into the
barrel and tighten the barrel cap and follower assembly with the barrel.
LOADING GREASE GUN USING BULK GREASE
1. Make sure the gun is disconnected from the air supply. Pull back the
plunger rod handle (L) to the end of the barrel (D) and lock it (K).
2. Remove the head assembly of grease gun by rotating it counter-
clockwise. Release the plunger handle (K and L) and allow the
handle to move to its most forward position.
3. Insert the open end of the barrel into the grease.
4. Slowly pull the plunger rod handle while pushing the barrel deep
into the grease until the plunger rod is completely extended. Lock it
in place
5. The grease gun barrel will be filled with grease. Remove the barrel
and wipe the grease from the outside surface before use.
6. Screw the head of the gun onto the barrel, stopping at least 2-3
turns before the barrel is fully tightened.
Fig. 3