Propellerhead ROTOR, Руководство по эксплуатации

Страница: 7 / 8

ROTOR - ROTARY SPEAKER
7
Dry/Wet
D
Set the relationship between the rotary speaker signal and the dry input audio signal with the Dry-Wet knob.
Volume
D
Set the overall output volume with the Volume knob.
Connections
!
Remember that CV connections are not stored in the Rotor patch!
Mod Input
These control voltage (CV) inputs (with associated trim pots) can modulate following parameters in Rotor:
• Speed
Here, you can patch a bipolar CV signal which modulates the Slow and Fast parameters in combination. A positive
CV input signal makes both the Slow and Fast parameters go even faster and a negative CV input signal makes
them go slower. The Slow and Fast front panel parameter ranges can be exceeded by modulating them via this
input.
• Drive
A bipolar CV signal patched here will modulate the Drive parameter. A positive signal increases the Drive amount
and a negative signal decreases it. Note that the default Drive front panel parameter range can be exceeded by
sending high positive CV values on this input.
• Dry/Wet
A bipolar CV signal patched here can modulate the Dry/Wet front panel parameter. Zero modulation means that
the current Dry/Wet knob setting is valid.
• Doppler
A bipolar CV signal patched here will modulate the Doppler parameter. A positive signal increases the Doppler
parameter amount and a negative signal decreases it. Zero modulation means that the current Doppler knob
setting is valid.