Flow Chart Programming Instructions for : RPM TACHOMETER 2 1/16” CONTROLLER
S
UBMENU
(
ENTER FROM MAIN MENU
)
(Press two(2) buttons simultaneously for 5 seconds)
OPTION:RESTORE FACTORY DEFAULT:
While in
PEAK PLAYBACK
, press and hold the
center and right buttons for five seconds. Dial
pointer will step five times and return to zero.
This will erase all user-programmed calibrations
and settings, and return to
NORMAL OPERA-
TION
.
PEAK
LOW
HI
OPTION: SELECT PPR (Pulses Per Revolution)
The WHITE/DIMMER circuit must be installed and produce 12vdc before PPR
can be programmed. While in
NORMAL OPERATION
, press and hold center
and right buttons for 5 seconds. Dial will flash blue rapidly. Press down and up
buttons to select PPR value by moving dial pointer to corresponding RPM. Press
the center button to save and return to
NORMAL OPERATION
.
(See PPR Chart Page 4-5)
OPTION :POINTER BRIGHTNESS:
While in
DIAL BRIGHTNESS
, press and hold the
center and left buttons for five seconds to enter
pointer brightness mode. The dial pointer will start
to flash and point to the upper right.
OPTION A:DEMO MODE:
WHILE IN
C
O
L
O
R
S
C
H
E
M
E
, press and hold the center and right buttons for
five seconds. Dial will scroll through the seven color schemes. The
HI
,
LOW
and
PEAK
will light, and the dial pointer will move. Press the center button to
return to
NORMAL OPERATION
.
OPTION: POINTER BRIGHTNESS:
Press down and up buttons to
adjust the pointer brightness. Press the
center button to save and return to
NORMAL OPERATION
PRESS
BOTH
PRESS
BOTH
PRESS ONE
AT A TIME
DOWN
-
UP
+
U.S. Patent # 7,612,660 & 7,278,749
PRESS
BOTH
PRESS
BOTH
