ProofVision 19 inch Waterproof TV, Руководство пользователя

Страница: 16 / 16

ProofVision
“Making it work in challenging conditions”
Package list
Please check you have all the below items:
Note: For any TV above 24 inches, the package will not contain a transformer
1. TV unit
2. Mounting back box
3. Power cable
4. Transformer
Installation of cables into the TV
1. Place the TV face down onto a flat surface
taking care not to damage the screen, we
recommend you use something soft to
lay the TV on.
2. Unscrew the screws and remove the
cover (figure 1).
3. Route all the cables into the correct
connections ensuring they lay across the
rubber gasket (figure 2).
4. Close the cover and replace the screws
(figure 3). The cover may not sit
completely flush due to the cables, this is
normal and the screws should not be
over tightened.
Installation of the TV onto the wall
1. Measure the dimensions of the back box and make a
cut-out in the wall accordingly (figure 4)
2. Make sure there is a route for the required cables to
be connected between the TV and your AV sources
e.g. DVD player (figure 5)
3. Place the back box into the cut-out on the wall with
the supplied screws (figure 6) ensuring the back
box is flush with the cut-out (figure 7)
4. Take the TV set and connect the power and AV
cables. Carefully insert the TV into the back box and
align the mounting pegs with the corresponding
holes in the back box (figure 8). The TV should slide
down slightly and lock into position.
5. We recommend applying a bead of silicon sealant
between the edge of the TV frame and the wall.
5. Remote control with battery
6. User manual
7. Screw set
Figure 1
Figure 2
Figure 3
Figure 4 Figure 5 Figure 6
Figure 7
Figure 8