Pronto M61 Скачать руководство пользователя страница 39

Страница: 39 / 80

SECTION 7—SEAT

WARNING

After any adjustments, repair or service and before use, make sure that all attaching

hardware is tightened securely - otherwise injury or damage may result.
Before performing any maintenance, adjustment or service verify that On/Off

switch on the joystick is in the Off position.

Adjusting the Back Angle

NOTE: For this procedure, refer to FIGURE 7.1.

1. Lift up on the release handle and adjust seat to desired angle.
2. Let go of the release handle to lock the back in position.

FIGURE 7.1

Adjusting the Back Angle

Adjusting the Headrest

NOTE: For this procedure, refer to FIGURE 7.2.

1. To raise the headrest, lift the headrest up to the desired position.
2. To lower the headrest, push the release tab towards the front of the wheelchair. Lower

the headrest to the desired position.

FIGURE 7.2

Adjusting the Headrest

Release Handle

Headrest

Release Tab

Headrest

Tube

Содержание M61

















































































Результаты поиска

Содержание M61

Отзывы:

Похожие инструкции для M61

Бренды по названию

Популярные бренды

Pronto M61, Руководство владельца по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание M61

Отзывы:

Похожие инструкции для M61

Бренды по названию

Популярные бренды