background image

________________________________________________________________________________ 

 Squeeze&Turn 19472-19479 

 

4

 

Safety 

The operator should use the personal safety equipment (e.g. protective shoes) that handling the 
specific goods requires. 

Stated maximum load must not be exceeded.  

 

Be aware of the risk of crushing present between the attachment and the trolleys legs or the floor 
when raising or lowering the load. Avoid putting hands or other parts of your body under the load. 

4.1

 

Storage and transport 

When storing or transporting the trolley the remote control, motor cable and power cable to the 
control box should be disconnected. 

If the attachment is attached to a trolley when transported, the trolley should be carefully tied 
down to minimize the tipping risk. 

If the attachment is transported separately it should be carefully packed to protect the expander 
and control box. 

 

4.2

 

Moving 

The attachment should always be lowered to the lowest possible position before moving the 
trolley to have the safest and most stable handling possible. Be cautious when passing thresholds, 
cables and other objects on the floor. 

When moving heavy loads the handling can be easier if the directional lock is applied on the 
trolley.  

4.1

 

Loading and unloading 

The operator is responsible for the correct use of the attachment.  

Do not place any parts of your body under the load when lowering the load. 

Only use this tool for the intended load. Other loads can be deformed when the gripper applies 
pressure on the surface.   

Содержание Squeeze&Turn 19472





















Отзывы: