8
Operation
1. POWER ON: Once you have made all the equipment connections to your mixer, press
the POWER SWITCH (12). The power will turn on and the POWER LED (22) will glow
RED.
2. CHANNEL 1: The PHONO/LINE SWITCH (4) allows you to select the PHONO 1/LINE
1 (17) jack to input phono or line level. The CHANNEL SLIDE (5) controls the input
level of this channel.
3. CHANNEL 2: The PHONO/LINE SWITCH (6) allows you to select the PHONO 1/LINE
1 (18) jack to input phono or line level. The CHANNEL SLIDE (7) controls the input
level of this channel.
4. CHANNEL 3: The MP3/BT/LINE SWITCH (8) allows you to select the USB
BLUETOOTH OR LINE 2 CHANNEL (19). The CHANNEL SLIDE (9) controls the input
level of this channel.
5. CROSSFADER: The CROSSFADER (10) allows you to mix the sources 1/2 into each
another.
6. TALKOVER (3) The purpose of the talkover section is to allow the program playing to
be muted so that the mic can be heard above the music. When you switch the
TALKOVER SWITCH, the talkover will be on and the volume of all sources except the
Mic inputs are lowered by 12 dB. The Micro volume knob (2) allow you to control the
level of MIC1/MIC2.
7. Connect your headphones to the headphones socket and select the desired channel
(channel 1-3 or MIC) for monitoring with the Cue switch (1). With this knob PHONE
(11), you can adjust the headphones volume
8. OUTPUT-METER: The OUTPUT-METER (13) indicates either the MASTER output left
and right levels.
9. The USB (23) jack can connect to USB stick.
10. |<< (24): Use this button to re-start the track or to select the previous track.
11. Play/Pause (25): Each time you press this button, the operation changes from play to
pause or from pause to play.
12. >>| (26): Use this button to select the next track.
13. VOL-(27): Use this button to control level down.
14. VOL+(28): Use this button to control level UP.
15. EQ (29): Allow you to select the effect.
16. LED DISPLAY (30): Display to MP3's information.
17. BLUETOOTH LED (31): It displays the Bluetooth operating status. When you
turn on the power, the Bluetooth LED is flashing slowly which means that it is
ready to connect to a Bluetooth device. If no connection is found after 1 minute,
the LED goes out and enters into standby mode. If the Bluetooth connection is
made with a player, the light flashes slowly, about 2-3 seconds flicker once. At
this point you can use the Bluetooth player playing music can hear the music of
the corresponding channel. Note: This function is only available on the products
with Bluetooth function.
Specifications
MIC 1 & MIC 2 sensitivity ....................................................... 1.5 mV (10 K ohms)
PHONO sensitivity ...................................................................... 3mV (47 K ohms)
LINE/CD sensitivity ................................................................ 150 mV (22 K ohms)
MASTER OUTPUT ..................................................... nominal 775 mV MAX 1.5 V
Frequency Response ............................................................... 20Hz-20KHz ±2dB
Talkover attenuation ...................................................................................
−
12dB
Headphone output ..................................................................... 300mV/8-16 ohms
