7
Front & back panels
Connections
1. Before using this unit, make sure that the AC Adaptor you plug into the mains supply
(21) has the correct voltage.
2. The unit is supplied with OUTPUT jacks. The OUTPUT jacks (20) are used to connect
to your amplifier.
3. The MIC INPUTS (15/16) accept a 6,3 mm connector.
4. On the rear panel you can find two stereo PHONO/LINE INPUTS (17/18), and 1 stereo
LINE INPUT (19). The PHONO/LINE SWITCH (4) enables you to set the Channel 1
(17) to phono or line. The PHONO/LINE SWITCH (6) enables you to set the Channel
2 (18) to phono or line. The USB/LINE SWITCH (8) enables you to set the input to USB
or line (19).
5. Headphones can be plugged into the rear panel mounted HEADPHONE (14) jack.
