Pronomic C Series
2020-02-21
Pronomic C Series / ArtNr.: 00063463-66
5
connection.
F.
When you press the pair button for 2-3 seconds, the devices are
disconnected and the Bluetooth connecting is terminated.
2.
SPEAKER MODE:
PA:
This is the default setting for the Pronomic C-series. Use this setting when
your loudspeaker is being used on a speaker stand and facing towards your
audience.
Monitor:
Use this setting when your loudspeaker is being used as a stage
monitor facing towards you or the stage.
SUB:
This mode
“cuts” off the lower frequencies of the loudspeaker to match
properly with an externally connected subwoofer.
Speech:
Use this setting when your loudspeaker is being used for Speech only
or Spoken Word applications and the device is facing towards the audience.
3.
Main (LED-indicators)
LIMIT (Automatic amplitude limiter):
When the audio signal reaches a dangerous threshold for the transducers, this
circuit will automatically intervene by reducing the amount of signal in order to
protect the speaker and to avoid distortion. If this safety function is active, the
indicator lamp will flash.
SIGNAL:
This LED indicates if a signal is received from the Combo /XLR input
Socket
POWER:
LED signal to indicates, that the active speaker is switched on.
4.
INPUT LEVEL:
R o t a r y B u t t o n f o r adjusting the level of each input.
The left area (from -
∞ to Line Max) controls the Line -In volume. The area on the
right regulates the microphone level. For the 12 "and 15" versions, the 2 Input
channels can be controlled by 2 separate rotary knobs.
5.
INPUT:
Balanced input for the connection of signal sources like mixing
consoles, instruments, or microphones. Connections can be established using
6,3mm jack plug or XLR connectors.
6.
BLUETOOTH VOLUME:
Turn this rotary knob to adjust the input volume of
your paired Bluetooth device.
7.
MIX OUT SELECTOR:
When the (Mix) button is pressed, the set levels of
Volume 1, Volume 2 and Bluetooth Volume will be sent to the Mix-Out socket. If
the (CH1) key is not pressed, only the input signal from input 1 (regardless of
volume control 1) is passed on directly to the mix-out socket.
8.
MIX OUT:
The signals (see point 7) can be forwarded to an external
loudspeaker or subwoofer via this XLR output. The DSP does not affect the
output level.
Содержание 00063463
Страница 2: ......
