Pronk Technologies SimSlim SL-8, Руководство оператора

Страница: 13 / 20

Troubleshooting Tips
TROUBLESHOOTING TIPS
SYMPTOM SOLUTION
Not calling VTACH or VFIB Some arrhythmia systems will not call VTACH on a straight
jump out of clean NSR. At the start of ARR MODE 1 the NSR
section has some PVCs and runs mixed in. In some cases, it
may be necessary to let the arrhythmia system see some of
these PVCs prior to transitioning into VT ACH.
I am trying to advance For rapid single clicking, watch the LED. If you click a second
quickly through the time while the LED is still on, this will be seen as a double click,
waveforms, but which will change the mode. If you click a second time just after
sometimes I the LED has gone out, it will be seen as a second single click,
accidentally change the which will advance the waveform.
mode
Misshapen or undersized With Hardware E6 and prior, some monitors will occasionally
ECG waveform have interaction between the IBP and ECG. Unplug IBP to
work around the problem. On E7 hardware, touching the metal
shell of an IBP connector and an ECG snap at the same time can
cause waveform interaction.
Not picking RESP
Most monitors look for respiration drive across RNLA leads.
waveform
Some do not. If RESP waveform is not picking, try swapping
the RL and LL leads. Please keep in mind that RESP is zero
in ARR MODE 1 and ARR MODE 2.
No Heart rate on EASI When viewing AVR or V2 lead, change the V lead to V6 snap.
configured telemetry
Unable to resolve
Contact Pronk Technologies' Technical Support at:
problem
(800) 541-9802
Services
(Prices subject to change without notice)
SERVICE ITEM NUMBER DESCRIPTION PRICE (USO$)
Annual SimSlim Calibration Full checkout, adjustment and
calibration certificate
*Pronk Technologies recommends an annual calibration interval.
PRC:,NK TEOHNC:,LC:,GIES
Revision L 0 7/18/ 2017 www.pronktech.com (800) 541-9802 Page 13
Call for Pricing