PRONAR ZEFIR 85, Инструкция по обслуживанию

Страница: 15 / 88

PRONAR
B. SAFETY CONDITIONS
PRONAR
5
FACTORY GUARANTEE
The manufacturer, handing over the new tractor, grants guarantee that means the
manufacturer assures that the product does not have manufacturing defects and material defects detection
of which is possible during manufacturing process.
The guarantee consists in conducting, at the guarantor’s cost, (specified in the guarantee book) of
repair (including replacement of parts). The detailed guarantee provisions are included in the guarantee book
attached to each tractor. The guarantee book is the only document enabling the purchaser of the tractor to
benefit from guarantee servicing in authorized servicing points and it is not subject to replacement.
ATTENTION! The devices secured with leaden seals may be repaired only by the
authorized personnel of repair points. Wilful rupture of leader seal causes loss
entitlements resulting from the guarantee.
ATTENTION! Non-observance of recommendations included in the Servicing
Instruction of the Tractor causes loss entitlements resulting from the guarantee.
The cost of repair of damages occurred as a result of exploitation inconsistent with the
Servicing Instruction are covered by the purchaser of the tractor.
HANDOVER OF THE TRACTOR TO THE PURCHASER
The new tractor should be started for the first time by the guarantee mechanician or authorized
employee from the commercial service.
The first starting embraces detailed visual inspection and checking of action of the tractor and
instruction of the buyer on basic rules of utilization of the tractor. It is advisable that persons directly servicing
and using the tractor should be present during the first starting. The owner or user should obtain vocational
guidance embracing the following issues:
•
guidelines concerning safe servicing of the tractor,
•
location and meanings of numbers of the engine and the tractor,
•
indicators and controllers,
•
running-in,
•
manner of starting and stopping,
•
selection of gears in dependence on operational conditions warunków pracy,
•
use and regulation of the brakes and clutch,
•
use and regulation of the interlocking of the differential gear unit,
•
application of PTO,
•
functioning and steering of the hydraulic system,
•
connecting and disconnecting of to ols on the rear and front TPSS (option),
•
points of lubrication with oil and grease,
•
replacement of oils,
•
replacement and clearing of filters,
•
functioning and venting of the fuel system,
•
engine cooling system, pull of wedge belts,
•
servicing of the electric installation,
•
steering system and change of Wheel track,
•
pressure in tyres,
•
connecting, use and steering of external hydraulics,
•
securing of nuts and bolts,
•
transportation and storage of fuel.