PRONAR T700M/1, Перевод оригинальной инструкции

Страница: 133 / 166

Section 5
5.23 PRONAR T700M/1
Technical inspection schedule
5.18 SUSPENSION SYSTEM MAINTENANCE
INSPECTION OF TIGHTENING OF
U BOLT NUTS OF WHEEL AXLES
Check the tightening of the nuts
(5) of U bolts (2) of the wheel axles
using a torque wrench with the torque
510-605 Nm. The inspection should be
carried out cyclically: the first inspection
after traveling 50 km with a load or after
500 working hours, the next inspection
after 5000 km or after 1500 working hours,
then once a year. The nuts should be
tightened diagonally.
CHECK THE TIGHTNESS OF THE
BOLT NUTS
Check the tightness of the nuts (6) of
the rocker arm bolts (3) and nuts (7) of
680-800Nm
85-105 Nm
510-605 Nm
510-605 Nm
680-800Nm
623-I.04-1
1
2
3
3
2
4
4
4
10
9
10 8 11
8
6
5
7
7
5
5
5
7
Figure 5.14 Mechanical suspension system maintenance
(1) spring, (2) U-bolt, (3) rocker arm pin, (4) connector pin, (5) U bolt nut, (6) rocker arm pin nut, (7)
connector pin nut (8) clamping washer, (9) bracket, (10) rubber bushing, (11) securing cotter pin