PRONAR T679, Руководство оператора

Страница: 78 / 135

Pronar T679 SECTION 4
4.10
Turn off tractor engine. Ensure that unauthorised persons do not have access
to the tractor cab.
Disconnect lines of pneumatic, hydraulic and electrical systems according to
instructions contained in section (4.2).
Unlock the pin of the hitch of the first trailer. Remove the pin and drive tractor
away.
ATTENTION
Do NOT hitch a second trailer constructed on any chassis except dual axle.
4.4 LOADING AND SECURING LOAD
4.4.1 GENERAL INFORMATION ABOUT LOADING
Before beginning loading make certain that the tailgate and chute slide gate are properly
closed and secured. The trailer must be positioned to travel forwards and be hitched to the
tractor. Loading should only take place, when trailer is placed on flat level surface and
hitched to tractor. If the trailer is equipped with tarpaulin cover, it should be rolled.
ATTENTION
When a tailgate is tightly closed, that securing hooks must fully engage the rear gate
securing pin.
Regardless of the type of load carried, the user is obliged to secure it in such a manner that
the load is unable to spread and cause contamination of the road. If this is impossible, do
NOT transport this type of load.
Materials, which in contact with painted or steel surfaces may cause damage, should be
transported in sealed packaging (bags, boxes, barrels, etc.). After unloading, the load box
should be thoroughly cleaned with a strong jet of water.
If the transported materials exert high local pressure on the load box platform it should be
protected against damage using thick planks, plywood or other materials of similar properties.