PRONAR T679, Руководство оператора

Страница: 131 / 135

SECTION 5 Pronar T679
5.41
Tighten the bolts (5) using the correct torque according to table (5.7).
The design of the drawbar (1), and the faceplate (2) allows the three
settings (I) (II) (III).
Set and attach proper hitching eye to the drawbar plate.
Rotating drawbar eye or ball drawbar eye are used for the lower hitch.
Fixed drawbar eye is used for the upper hitch.
The drawbar design (1) makes it possible to set the drawbar eye in
two positions.
5.13 TROUBLESHOOTING
TABLE 5.8 Troubleshooting
FAULT CAUSE REMEDY
Brake system pneumatic
conduits not connected Connect brake conduits (applies
to pneumatic systems)
Applied parking brake Release parking brake.
Damaged pneumatic
system connection conduits
Replace.
Leaking connections
Tighten, replace washers or seal
sets, replace conduits.
Problem with moving off
Control valve or braking
force regulator damaged
Check valve, repair or replace.
Excessive bearing
slackness Check slackness and adjust if
needed.
Damaged bearings Replace bearings.
Noise in axle hubs
Damaged hub parts Replace.