Erro! Use a guia Início para aplicar Überschrift 1 ao texto que deverá aparecer aqui.
8
2.2.2 Sensor with probes
proMtec offers a great variety of sensor types. Depending on the several
application proMtec designs the best fitting sensor type for implementing in
your process without complexity.
Standard versions are on the one hand inline pipe sections, where flat sensor
probes are fitted onto the pipe. On the other hand there are insertion sensors
with two probes used in a special flange for installation in vessels.
In each case the evaluation unit is directly connected with the sensor probes
via microwave cables.
2.2.3 Cables
The microwave cables attend to carry the signal directly to the measuring
point and backwards to the evaluation unit. These cables are produced in
accordance to the newest technology and with the best available shielding
and assure a low-loss propagation.
The cables are delivered with a length of one to three meters (depending on
the requirements). Despite the high shielding the cables should be as short
as possible to avoid too much power loss.
The temperature sensor itself is already mounted into the pipeline
respectively the insertion sensor tube. So you’ve just to connect the cable
with the sensor and on the other side with the connectors inside the device
(read chapter 2.3.2).
