P.7
DISTORTION
-
Ensure the volume level of headphone is set to an approximate level.
-
The headphone is too far from the transmitter, move it closer.
-
The audio signal input level is too low. Increase the volume of the audio source.
TECHNICAL SPECIFICATIONS
Transmission Mode
:
UHF stereo
Carrier Frequency
:
2.4GHz Digital
Operation Voltage
:
Transmitter, DC 9V 400mA
Headphone, 3 x AAA size Rechargeable NiMh
batteries (included)
Frequency Response
:
30Hz – 20KHz
Distortion
:
0.5%
S/N Ratio
:
80dB
Operation Distance
:
Up to 50 Meters
NOTE:
Federal Communication Commission Interference Statement
This equipment generates uses and can radiate radio frequency energy and, if
not Installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
