Mini Spider
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Group Ltd is prohibited.
3
1. GENERAL INFORMATION
1.1. Application
The Mini Spider is a battery-powered welding carriage designed to make fillet
welds
by using MIG/MAG
torches. It is clamped to the surface with permanent magnets.
An optional magnet blocks increase the clamping force. An optional power supply
can be used to connect the carriage to a 110
–240 V power source.
1.2. Technical data
Voltage
18 V DC, 5.2 Ah
Power
25 W
Welding position (according to EN ISO 6947 and AWS/ASME)
PA / 1F
PB / 2F
Torch type
MIG/MAG
Torch diameter
16
–22 mm (0.63–0.87″)
Maximum allowed cable weight for horizontal work
8 kg (18 lbs)
Minimum workpiece thickness
4 mm (0.16
″)
Ground clearance
4 mm (0.16
″)
Horizontal pulling force
150 N
Cross slides adjustment range
0
–21 mm (0–0.83″)
up-down, left-right
Horizontal speed*
5
–110 cm/min
(2
–44 in/min)
Weight (without the battery)
7.6 kg (16.8 lbs)
* When the battery is fully charged.
