Mini Spider
This document is protected by copyrights.
Copying, using, or distributing without permission of JEI Group Ltd is prohibited.
11
Use the speed knob to set the required speed. Use the travel direction switch to
select a direction of travel. This will start the travel with the speed that is shown.
To stop the travel, set the travel direction switch to the middle position.
If you do not use the carriage for 2.5 minutes, it goes to the sleep mode. To go
back from the sleep mode, use a travel direction switch. When the battery is
discharged, the travel stops. Then, recharge the battery. To check the charge level,
press the button on the charge indicator.
After the work is finished, remove the battery / power supply.
3.2. Troubleshooting
Message
Problem
Solution
Not all display segments are on after
powering.
Contact service center for check
and repair.
Speed is shown in centimeters per
minute instead of inches per minute.
Contact service center.
Speed is shown in inches per minute
instead of centimeters per minute.
Contact service center.
Travel direction switch is not set to the
middle position when powering.
Set the travel direction switch to
the middle position.
Battery discharged. The carriage
stops.
Charge the battery or replace to
a fully charged.
