Promise Vess A2600 Скачать руководство пользователя страница 278

Страница: 278 / 365

ppendIx

: w

Indows

ysteM

eCoVery

This appendix provides step-by-step instructions creating a recovery disk used for restoring the

Windows operating system and programs in the event of a Windows OS failure. The storage device

used for the recovery disk can be a DVD drive (read-write), network storage or internal RAID on the

Vess A2000. This recovery disk is then used to restore the system drive to a state identical to what it

had been when it was last backed up.

Following the recovery disk creation instructions, and instructions for restoring the Windows operating

system from the previously created recovery disk. Once the operating system has been restored, the

data stored on the RAID volume of the Vess A2000 can again be accessed.

Important

A recovery disk must be created while the Windows OS is functioning. It is

recommended that the system disk (the mSATA C drive) be backed up on

a regular schedule. The Vess A2000 can be scheduled for regular system

drive backups to the RAID volume. Then, using one of the system recovery

methods (see below), the Windows OS and PROMISE RAID are reinstalled

so that the previously saved system data, including device drivers and VMS

software, can be retrieved from the RAID volume.

272

Vess A2000 Series NVR Storage Appliance

Promise Technologies

Содержание Vess A2600













































































































































































































































































































































































Результаты поиска

Содержание Vess A2600

Отзывы:

Бренды по названию

Популярные бренды

Promise Vess A2600, Руководство по эксплуатации продукта

Результаты поиска

Содержание Vess A2600

Отзывы:

Бренды по названию

Популярные бренды